top of page

ESB 52

​

 

Best Selling Electrode

​

E7018-1H4R

Stick Electrodes

Product Key            AWS Specification                 Application

ESB 44

E7016-H8

Application:

  • Suitable for fabrication and repair welding of dynamically loaded steel constructions, machines and agricultural equipments, workshop and maintenance welding.

​

Key Benefits:

  • Smooth and clean welds, blending into base metal without undercuts. Excellent gap bridging properties.

  • The double covering of this electrode produces a stable, concentrated and directed arc, thus being ideally suited for root pass and positional welding and is suited for AC welding.

  • Welds are of X-ray quality.

Spec Sheet available upon request

ESB 48

E7018-H8

Application:

  • Suitable for welding fabrication of dynamically loaded steel constructions, bridge, shipbuilding, pipeline, pressure vessels, tanks, boiler and machines where high toughness is required.

​

Key Benefits:

  • Weld metal recovery is approximately 115%.

  • Smooth and clean welds merging into base metal without undercuts.

  • Good gap bridging properties. Welds are X-ray quality.

  • Suitable for depositing buffer layers on higher carbon steels.

Available Sizes:

  • 3/32" x 14"

  • 1/8" x 14"

  • 5/32" x 18"

  • 3/16" x 18"

ESB 52

E7018-1 H4R

Application:

  • Suitable for welding of steel constructions, bridge, dam, thermal power plants, petrochemical industry, shipbuilding, high strength pipelines, pressure vessels, tanks

 

Key Benefits: 

  • The weld metal has a very low hydrogen content and is resistant to ageing.

  • Produces tough and crack-free welded joints, also suits for welding steels having a carbon content of up to 0.6% and rail joints.

  • Good operating characteristic, also in root pass and positional welding.

  • Very good gap bridging properties. Welds are of X-ray quality.

Available Sizes:

  • 3/32" x 14"

  • 1/8" x 14"

  • 5/32" x 18"

  • 3/16" x 18"

  • 1/4" x 18"

ESR 13

E6013

Application:

  • Suitable for joining and repair welding of light steel fabrications, iron works, wrought iron works, agricultural machines, boiler, chassis of vehicles.

  • Suitable for all position except vertical-down.

  • Particularly suited for the welding of horizontal fillets.

​

Key Benefits:

  • Very smooth weld bead appearance, with easy arc striking and re-striking properties, quiet and stable arc with fine droplet metal transfer.

  • Possible to use equally well both with AC and DC. Slag is completely self-releasing.

Available Sizes:

  • 3/32" x 14"

  • 1/8" x 14"

  • 5/32" x 18"

  • 3/16" x 18"

ESR 14

E7014

Application:

  • Preferably used in mild steel fabrication, sheet metal and ornamental iron works on poor fit-up joints.

  • Suited for the welding of horizontal fillets grooves with higher speed. Suitable for all position welding except vertical-down.

​

Key Benefits:

  • High current carrying capacity, low spatter.

  • Quiet, stable arc characteristics with fine and fast droplet metal transfer.

  • Very easy arc striking and re-striking.

  • Very smooth welds blending into base without undercuts.

  • Slag is completely self-releasing. Possible to use equally well both with AC and DC.

Available Sizes:

  • 3/32" x 14"

  • 1/8" x 14"

  • 5/32" x 14"

  • 3/16" x 14"

ESH 180R

E7024

Application:

  • Suited to produce long fillet welds and economically filling up large weld sections especially in shipbuilding.

  • Suitable to use in pre-painted plates.

​

Key Benefits:

  • Heavy coated, rutile type high-efficiency electrode having a weld metal recovery of approximately 180%.

  • Relatively low current intensities and short burn-off times.

  • Easy arc striking and re-striking.

Available Sizes:

  • 3/32" x 14"

  • 1/8" x 18"

  • 5/32" x 18"

  • 3/16" x 18"

ESC 60

E6010

Application:

  • Suitable for welding of pipes and plates in all positions at low welding currents.

  • Suitable for root pass and fill passes in vertical down direction.

  • Used in pipeline construction, shipbuilding, storage vessels and assembly works.

  • DCEN (-) is ideal in root passes and DCEP (+) is recommended to fill and cap passes in vertical down position.

Available Sizes:

  • 3/32" x 14"

  • 1/8" x 14"

  • 5/32" x 14"

  • 3/16" x 14"

ESC 61

E6011

Application:

  • Suitable for use in AC as well as DC.

  • Suitable for root pass and fill passes in vertical down direction.

  • Used in shipbuilding, storage vessels, boilers, pipeline constructions, assembly and repair works in mild steels, steel casting, galvanized sheets and machinery parts.

  • AC or DCEN (-) is ideal in root passes and AC or DCEP (+) is recommended for fill and cap passes in vertical down direction.

Available Sizes:

  • 3/32" x 14"

  • 1/8" x 14"

  • 5/32" x 14"

  • 3/16" x 14"

ESC 80G

E8010-G

Application:

  • Suitable for root pass and fill passes in vertical down direction for use in pipeline construction, shipbuilding, storage vessels and assembly works.

  • DCEN (-) is ideal in root passes, DCEP (+) is recommended for fill and cap passes in vertical down position.

​

Key Benefits:

  • Medium coated and Ni (Nickel), alloyed cellulosic type electrode for welding high strength and low alloyed steels.

EM 150

E8018-C3

Application:

  • Suitable for welding steel constructions, off-shore platforms, bridge, machinery, production and in their root pass applications where low high strength steels and fine grained structural steels used.

​

Key Benefits:

  • Weld metal is high crack resistance under difficult operating conditions such as dynamic loads and especially low environmental temperatures.

Available Sizes:

  • 3/32" x 14"

  • 1/8" x 14"

  • 5/32" x 18"

  • 3/16" x 18"

EM 150W

E8018-W2

Application:

  • Suitable to use in fabrication of steel constructions like bridge, stadium, off-shore platforms.

 

Key Benefits:

  • Heavy coated basic type electrode, designed for welding weathering steels, like COR-TEN steels, high strength steels, particularly copper containing steels which are resistant to atmospheric corrosion.

  • Easy to use in root and fill passes. Welds are of X-ray quality.

Spec Sheet available upon request

EM 172

E8018-C2

Application:

  • Suitable for use in welding of storage tanks and piping which are subjected to low temperatures.

 

Key Benefits:

  • Heavy coated basic type electrode for welding fine grained structural steels and especially cryogenic steels.

  • Electrode produces tough and crack-free welded joints.

  • Weld deposit is of extremely high metallurgical purity and very low hydrogen content. 

  • Electrode features a stable and concentrated arc.

  • Especially 2.50mmm and 3.25mm diameters are well-suited for positional welding. Welds are of X-ray quality.

Spec Sheet available upon request

EM 175

E10018-G H4

Application:

  • Suitable for welding high strength steels used in fabrication of cranes, earth worming and similar heavy construction equipment.

 

Key Benefits:

  • Heavy coated basic type electrode for welding fine grained structural steels 

  • Weld deposit is of extremely high metallurgical purity and very low hydrogen content.

  • Electrode features a stable and concentrated arc.

  • Especially 2.50mm and 3.25mm diameter well suited for easy positional welding. Welds are of X-ray quality

Spec Sheet available upon request

EM 180

E11018-G H4

Application:

  • Suitable for welding high strength steels used in fabrications of crane, earth moving equipment, heavy machinery parts.

  • Suitable for use in steel constructions, pressure vessels, tanks, boilers and special fabrications and in their root pass applications with safety.

 

Key Benefits:

  • Weld deposit is of extremely high metallurgical purity and very low hydrogen content.

  • The electrode features a stable and concentrated arc.

  • Especially 2.50mm and 3.25mm diameters are well suited for easy positional welding. Welds are of X-ray quality.

EM 212

E8018-B2-H4R

Application:

  • Suitable for welding creep resistant steels employed in the fabrication of pressure vessels, boilers and pipes

  • Preheating interpass temperature and post-weld heat treatment shall be done according to base metal used.

​

Key Benefits:

  • Welds are of X-ray quality. Generally preferred in thick sections where high mechanical properties and X-ray quality are necessary.

Spec Sheet available upon request

EM 222

E9018-B3

Application:

  • Suitable for welding creep resistant and high pressure hydrogen resistant steels used in construction of pressure vessels, boiler and pipin

  • Generally preferred in thick sections with high mechanical properties and X-ray quality necessary.

  • Preheating, interpass temperature and post-weld heat treatment should be done in accordance with base metal to be welded.

Spec Sheet available upon request

EM 243

E12018-G

Application:

  • Suitable for welding cementation steels and 1% Cr, 2.5% Ni, 0.7% Mo containing steels and cast steels.

  • Suitable for use in machine building and construction of apparatus, as well as for repair welding of components made of similar steel grades.

  • Preheating, interpass temperature and post-weld heat treatment should be done in accordance with base metal to be welded.

Spec Sheet available upon request

EM 290

E9018-B9-H8

Application:

  • Suitable for welding high temperature creep resistant steel type 9Cr-1Mo-V-Nb-N steels with operating temperatures of up to 650 Celsius.

  • Suitable for welding heat exchanger pipes and components.

  • Electrode is particularly suited for welding thick walled cast steel components, which are subjected to tempering of 8 hours at 740 Celsius.

Spec Sheet available upon request
bottom of page