Chemicals | Magma North America

Welding Chemical

Leak Detection Compound

Regular Temp Type I (Oxygen Compatible)

Features:

Highest foaming ability.
Highest foam stability / low residue.
Non-toxic / exempt from labeling requirements for hazardous substances.
Aerosol stable for up to 24 months storage.
Other containers can be stored up to 12 months.

Application:

Oxygen compatible regular temperature leak detector (meets MIL-PRF-25567E) with 12" pull out extension tube in 8 oz bottles.
Can be used with all welding gases
clear free flowing liquid with no objectionable odor.

Temp Range: +27°F to 200°F / -3°C to 93°C

Low Temp Type II (Oxygen Compatible)

Features:

Highest foaming ability.
Highest foam stability / low residue.
Non-toxic / exempt from labeling requirements for hazardous substances.
Aerosol stable for up to 24 months storage.
Other containers can be stored up to 12 months.

Application:

Oxygen compatible low temperature leak detector (meets MIL-PRF-25567E) with 12" pull out extension tube in 8 oz bottles.
Can be used with all welding gases
clear free flowing liquid with no objectionable odor.

Temp Range: -65°F to 200°F / -54°C to 93°C

Regular Temp

Application:

Regular temperature solution for detection of leaks in compressed air and gas systems.
Yellow solution allows for easier leak location against reflective surfaces such as aluminum and stainless steel.
Includes viscosity additive to allow for adherence to vertical surfaces.

Temp Range: +27°F to 200°F / -3°C to 93°C

Mid Temp

Application:

Mid temperature solution for detection of leaks in compressed air and gas systems.
Yellow solution allows for easier leak location against reflective surfaces such as aluminum and stainless steel.
Includes viscosity additive to allow for adherence to vertical surfaces.

Temp Range: -35°F to 200°F / -37°C to 93°C

Low Temp

Application:

Low temperature solution formulated for detection of leaks in propane, butane, LPG and compressed air and gas systems.
Red solution allows for each leak location in testing tube fittings and valves, pipe connections, gas cylinders.

Temp Range: -10°F to 200°F / -23°C to 93°C

Dye Penetrant Inspection

Visible Dye Penetrant - Solvent Removable

Application:

Red dye, solvent removable penetrant.
No chlorinated solvents, meets ASME section V halogen and chloride content requirements.

Visible Dye Penetrant - Water Washable

Application:

Red dye, water washable penetrant.
No chlorinated solvents, meets ASME section V halogen and chloride content requirements.

Developer - Non-Aqueous Wet

Application:

Non-aqueous wet developer that sprays out white for red dye indications.

Solvent Cleaners

Application for C101-A:

Solvent blend of non-chlorinated petroleum hydrocarbon solvents.
Meets ASME section V halogen and chloride content requirements.

Application for C901N-A:

Solvent cleaner for removal of red dye penetrants and developer powders.

8 Can Test Kits

Note: Each kit includes a paint marker and cleaning wipes

Magnetic Particle Inspection - Developer

Application:

Non-aqueous wet contrast developer that sprays out a fine mist of white powder, improves ability to see magnetic particles on surface areas.

Cooling Fluids

Inhibited Propylene Glycol Based

Application:

An inhibited blend of di-ionized water and propylene glycol.
Product does not contain ethylene glycol or other hazardous ingredients.
Low conductivity.

Temp Range: -10°F / -12°C

Inhibited Ethylene Glycol Based

Application:

Available in a ready to use format.
Designed to cool and protect equipment.
Low conductivity.

CF1 CF2

Regular Temp Range: -19°F / -7°C

Mid Temp Range: +6°F / -14°C

Low Temp Range: -32°F / -35°C

Extreme Temp Range: -60°F / -52°C

CF3 CF4

Anti-Spatters

Heavy Duty Solvent Anti-Spatter

Application:

Non-flammable, quick drying, solvent based spray.
Heat resistant for high temperature applications.

Surfactant Water Based Anti-Spatter

Application:

Surfactant based anti-spatter for prevention of splatter build up in welding applications.
Ready to use, no further dilution required, not affected by freezing.

AS-DR (Drum)

Robotic Water Based Anti-Spatter

Application:

Oil free water-based product for use in robotic welding applications.
Product will not affect seals and materials used in welding stations.
Ready to use, no further dilution required, not affected by freezing.

Ceramic Anti-Spatter

Application:

Dries to form a solid, durable coating, ensuring that anti-spatter residues do not drip into weld to cause contamination or porosity.

Premium Water Based High Solids Anti-Spatter

Application:

Provides a thin, uniform protective coating on MIG nozzles, tips, fixtures and materials during weld process.
Prevents spatter build up in welding applications on all types of materials including steels and aluminum.
High solids content ensures an effective protective coating is placed over surface area.

Nozzle Tip Dip

Application:

Is made from USP grade material and provides a rich protective barrier.
Packaged in metal cans.
Eliminates burn through associated with putting hot tip through a plastic jar, allows for 100% product use.

Zinc Sprays

Aluma Galv. Zinc Rich Spray

Application:

Provides superior zinc protection on welds, galvanised steel, base iron and other ferrous surfaces.
Provides brilliant metallic aluminum protective finish.

Premium Galv. Zinc Rich Spray

Application:

Quick drying, galvanised zinc rich gold spray that provides a brilliant metallic aluminum protective finish

Wire Lube Pads

Square Regular

Application:

Pre-treated wire lube pads that reduce friction in wire feed units by removing dirt and dust particles from welding wire.
Not for aluminum applications.

Round Regular - Premium

Application:

Pre-treated pink felt material with wire feed lubricant that is coated to remain wet without containing excess liquid material.
Not for aluminum applications.

Wire Cleaning Pads

Round Regular - Premium

Application:

Product is made with a high-density grey felt material designed to maximise wire cleaning.
Each pad comes with steel clip.
For aluminum applications.

Note: Lube pad fluid not included.

Plasma Arc Water Table Fluid

Application:

Formulated to eliminate steel corrosion, foul odors and insect infestation in plasma water tables and work pieces.
Can be used for stainless steel, steel and other ferrous metal fabrications.
DO NOT use on copper.

Welding Paste

Protective Welding Paste - Magmaweld

Application:

Prevents sticking of the spatters on to torches. It is applied by dipping torch 2-3mm to the nozzles paste.Saves he torch and extends the lifespan of the nozzles. Non-toxic, odourless. Non flemable and fume free. Saves metal surface against corrosion.
Silicone Free
Solvent Free
Insoluble at room temperature
CFC free

Pickling Paste - INOX Paste - Magmaweld

Application:

Pasivated layer on the stainless surfeces can be broken with the heat while welding process. This causes colour change and oxidation. Magmaweld inox cleaner eliminates these negative situations. Apply product with a brush when the workpiece is cold to eliminate these negative situations on the workpiece and wait for 15-20min. Make sure you asked for SDS report of the product.
Reacts in a short time.
Easy clean.
Provides homogenized colour without going yellow.